For Apple iPhone 4S LCD Screen Replacement And Digitizer Assembly with Frame - OEM Original Quality Grade : LCDONE, Providing iPhone LCD Recycling,iPhone LCD Repair Swap and iPhone LCD Screen Replacement

For Apple iPhone 4S LCD Screen Replacement And Digitizer Assembly with Frame - OEM Original Quality Grade : LCDONE, Providing iPhone LCD Recycling,iPhone LCD Repair Swap and iPhone LCD Screen Replacement

Apple confirmed that iPhone will match the OLED screen in 2018

According to the Nikkei Asian Review reports, Apple has informed its supply chain vendors, all the iPhone will switch to OLED screen in 2018.

Reported that in 2017, iPhone will be the part of the first import the OLED, and before the news that Apple next year will be used on at least an iPhone OLED, and perhaps even curved surface screen version.

In order to compete for this super order, Samsung Display, LG Display, Japan Display (JDI) three panel giants are aggressively courted Apple, at the same time to extend the OLED production capacity.

Samsung this year will invest 8 trillion won, the capacity of the OLED to expand by 50%, which has the capability of annual output of 500 million the OLED panel. Samsung shipped 320 million smartphones in 2015, so the OLED panel capacity must win enough external orders.

LG plans in the next few years out of 10 trillion won, improve the production ability of mobile phone, TV, OLED panel, JDI is planning the next year, 50 billion yen, starts the new OLED production line.

LCDONE,a high-tech company providing the solutions for the mobile phone broken glass screen,including iPhone LCD recycling,Samsung Galaxy LCD recycling,iPhone LCD screen repair swap,Samsung Galaxy LCD screen repair swap,iPhone LCD screen replacement,iPad touch screen replacement and mobile phone accessories.

We do not produce the mobile phone lcd screen, we only do recycle,repair swap and resell lcd screen.

Surprise, now ,register on our website https://www.lcdone.com, with the referral code : jackievon001, you can get a $5 gift certificate. And if you submit order on our website, we will send the free iPhone Repair Tools Kits to you together at the time of delivery.

How to replace iphone 6 plus lcd screen and digitizer assembly - LCDONE

Step 1. If possible, power down your iphone 6 plus, in this example the LCD is damaged, so we do not have that option.

 

Step 2. Remove the two bottom three four millimeter pentalobe screws, located next to the Lightning connector.

 

Step 3. Place a suction cup near the home button, while applying firm constant force use the plastic triangle opening tool to work around the display assembly and separated from the iphone 6 plus rear case. the display assembly is still connected to the iphone by several cables, so don't try to remove it entirely just yet.

 

Step 4. Remove the following five phillips screws securing the metal bracket to the motherboard. now use the fine tip curved tweezers to remove the metal bracket and disconnect the LCD digitizer and front camera and proximity sensor cables.

 

Step 5. Remove the following three Phillips screws securing the earpiece speaker bracket to the display assembly, with the tweezers remove the bracket and then the earpiece speaker.

 

Step 6. Carefully pry up the front camera and proximity sensor ribbon cable away from the display assembly.

 

Step 7. Remove the following two Phillips screws securing the home button metal bracket in place. disconnected peel the home button ribbon cable away from the display assembly. remove the home button assembly.

 

Step 8. Remove the eighth Phillips screws that secure the LCD shield plate to the iphone 6 plus display assembly, peel updated he civ securing the home button cable connector to the front panel and remove the LCD shield played.

 

LCDONE,a high-tech company providing the solutions for the mobile phone broken glass screen,including iPhone LCD recycling,Samsung Galaxy LCD recycling,iPhone LCD screen repair swap,Samsung Galaxy LCD screen repair swap,iPhone LCD screen replacement,iPad touch screen replacement and mobile phone accessories.

 

We do not produce the mobile phone lcd screen, we only do recycle,repair swap and resell lcd screen.

 

Surprise, now ,register on our website https://www.lcdone.com, with the referral code : jackievon001, you can get a $5 gift certificate. And if you submit order on our website, we will send the free iPhone Repair Tools Kits to you together at the time of delivery.

How to replace iphone 5 lcd screen and digitizer assembly - LCDONE

1.Remove the two pentalobe screws that are located on both sides of the lightening connector port which is on the bottom of your iPhone 5.

2.Place the suction cup on the display assembly near the home button. Use the plastic opening tool to separate the display assembly from the case of the iPhone 5.With the suction cup, pull up on the display assembly while holding the outside frame of the iPhone 5 down. Near the home button, in the left corner of the iPhone 5, will be an area that will expose enough space to get in the plastic opening tool.

3.Once you have the opening tool in the space, pry the display assembly from the iPhone 5. Work your way around the iPhone 5 until it is completely separated and can be pulled back with the suction cup.

4.Peel back the display assembly to expose the metal cover that secures the display assembly flex cables.Locate and remove the three small Phillips screws (#00) that secure the metal cover. Remove the cover from the iPhone 5.

5.There are a series of connections that will require the plastic opening tool or spudger to pry up and remove.The first of these connections is for the front-facing camera and sensor flex cable.

6.The touch screen/front panel cable is next. Gently pry up and out to disconnect the cable.

7.The last connection is the LCD cable. Once the cable is disconnected, remove the entire display assembly from the iPhone 5.

8.Locate and remove the two small Phillips screws (#00) that secure the cover to the earpiece speaker. Remove the cover from the iPhone 5.When the cover for the earpiece speaker is removed, lift the speaker up and away from the iPhone 5.

9.Using the flat end of the spudger, maneuver the front-facing camera and sensor flex cable away from the iPhone 5.

10.Locate and remove the two small Phillips screws (#00) that secure the home button assembly.Remove the home button assembly from the iPhone 5.

11.The actual home button is secured by a small amount of adhesive. Use the spudger to remove the home button from the display assembly.

12.Locate and remove the six small Phillips screws (#00) that secure the LCD shield to the display assembly.Once the Phillips screws are removed, lift the shield up and away from the iPhone 5.

13.Locate and remove the three small Phillips screws (#00) that secure the battery connector and lightning connector covers.Once the screws are removed, take the metal covers off of the iPhone 5.

14.Utilize the spudger to pry up and disconnect the battery connector from the motherboard.

15.Using the plastic pull-tab and the spudger, remove the battery from the case of the iPhone 5.

16.Locate and remove the two small Phillips screws (#00) that secure the top motherboard bracket.Once the screws have been removed, lift the bracket up and away from the iPhone 5.

17.For the next few steps, the spudger will be utilized to disconnect several connections. This will allow you to remove the iPhone’s motherboard.Remove the LED flash from the motherboard by pulling it up and away from the assembly.

18.The next connection is the for audio/volume controls. Lift up and pry it from the socket to remove the plug.

19.An interconnecting cable is next to be removed. Lift up and pry it from the socket to remove the cable.

20.There is another interconnection cable that will need to be disconnected as well.

21.The last plug is the lightning port assembly. It is located on bottom of the motherboard.

22.One of the two antenna connections is on the front of the board. Pry up and remove the wire from its location.Maneuver the headphone jack out of its housing and prepare to remove it in the follow steps.

23.Before removing the motherboard, use the SIM card removal tool, or a paper clip, to remove the SIM card tray from the iPhone 5.

24.Locate and remove the two small Phillips screws (#00) inside the top portion of the iPhone 5 case.

25.Next, locate and remove the two small Phillips screws (#00) and the three standoff screws. The three standoff screws secure the motherboard into the iPhone 5. You will need a small flathead screwdriver to remove these screws.

26.Remove the second antenna plug on the bottom of the motherboard. Now, you can carefully lift the motherboard up and out of the iPhone 5.

27.Locate and remove the two small Phillips screws (#00) that secure the rear-facing camera connection to the motherboard.With these screws removed, take the plate off that was securing this plug.

28.Using the spudger, gently pry up the connection to remove the rear-facing camera from the motherboard.

29.Locate and remove the seven small Phillips screws (#00) that secure the lightning connector and loudspeaker assembly inside the case of the iPhone.

30.Use the flat end of the spudger to break free the adhesive that secures the lightning connector and loudspeaker assembly inside the case of the iPhone 5.Remove these two parts from the iPhone 5.

31.With the lightening connector and loudspeaker assembly free from the case, use the spudger to separate the two units from each other. They are held together with a small amount of adhesive.

32.Locate and remove the three small Phillips screws (#00) that secure the vibrator in the corner of the iPhone 5 case.Remove the vibrator from the iPhone 5.

33.There are three additional small Phillips screws (#00) that secure the volume and silent switch assembly on the side of the iPhone 5 case.

34.Use the spudger to peel out the WiFi and Bluetooth Antenna Flex Cable from the iPhone 5 case.

35.Locate and remove the last small Phillips screw(#00) that secures the power and volume button assembly in the iPhone 5.

36.Use the flat end of the spudger to remove the ribbon cable for the volume, silent switch, and power buttons from the iPhone 5.

LCDONE,a high-tech company providing the solutions for the mobile phone broken glass screen,including iPhone LCD recycling,Samsung Galaxy LCD recycling,iPhone LCD screen repair swap,Samsung Galaxy LCD screen repair swap,iPhone LCD screen replacement,iPad touch screen replacement and mobile phone accessories.

We do not produce the mobile phone lcd screen, we only do recycle,repair swap and resell lcd screen.

Surprise, now ,register on our website https://www.lcdone.com, with the referral code : jackievon001, you can get a $5 gift certificate. And if you submit order on our website, we will send the free iPhone Repair Tools Kits to you together at the time of delivery.

How to replace iphone 4 lcd screen and digitizer assembly -LCDONE

1.Let’s begin to disassemble the iPhone 4 byremoving the SIM card tray. Use the SIM cardejection tool or a paperclip to eject and removethe tray from the iPhone 4.

2.Remove the two pentalobe screws on either sideof the dock port connector with the iPhone 5-PointPentalobe screwdriver.

3.Grip the back cover of the phone and push upward about 1/8 of an inch to remove the back cover from the iPhone 4.

4.There is a cover over the battery connector. Todisconnect the cover, locate and remove the onePhillips screw (#00) that secures it in place.When the screw is removed, use the spudger togently pry up the connection releasing it from themotherboard.

5.To remove the battery, use the plastic openingtool and the pull-tab to pry the battery out of itslocation. It is secured by a small amount ofadhesive.

6.To begin the process of removing the motherboard from the iPhone, locate and remove the two Phillips screws (#00) that secure the speaker assembly’s connection into the iPhone 4. Next, peel back the ribbon cable.

7.Once you peel back the speaker assembly‘s ribboncable, one of two Phillips screws (#00) that need tobe removed will be revealed. Use the appropriatescrewdriver to remove both screws.You will also need to use the spudger to pry theplugged connection from the corner of themotherboard.

8.Remove the two Phillips screws (#00), located oneither side of the assembly, that secure the dockport into the iPhone.The ribbon cable for the home button has a lockingsocket. Flip the tab on the locking socket to releaseand remove the ribbon cable from the connection.

9.With the securing screws and ribbon cableremoved from the assembly, use the spudger to liftthe dock port assembly out of the bottom of theiPhone.

10.Locate and remove the seven Phillips screws(#00) that secure the connection plate and vibratemotor into the iPhone.You can now remove the vibrate motor from theiPhone 4.

11.With the screws removed from the connectionplate, use the tweezers to lift the protectionplate out of the iPhone 4.

12.A total of six connections need to be pried up fromthe motherboard. Use the tweezers to remove theconnections.With all of the connections lifted from themotherboard, pry the rear-facing camera out of itshousing and remove it from the iPhone 4.

13.Locate and remove the final two screws securingthe motherboard into the body of the iPhone.Remove the single Phillips screw (#00).Next, remove the standoff with a small flat heador slotted screwdriver.

14.At this point all connections and securing screwsare removed from the motherboard. Themotherboard is free, so remove the motherboardfrom of the iPhone 4.

15.There is a metal clip that secures the front-facingcamera into the iPhone. Use the tweezers to lift theclip from the iPhone.You can now remove the front-facing camera fromthe iPhone.

16.The earpiece speaker is secured with a smallamount of adhesive. Use the tweezers to lift theearpiece speaker out of the iPhone.

17.Locate and remove the four Phillips screws (#00)that secure the volume button assembly into theside of the iPhone.

18.A ribbon cable connects the headphone jack andvolume button assembly. When prying theheadphone jack out of it’s housing, be mindful ofthis connection because it can be easily damaged.With the headphone jack peeled from the phone,you will see the final Phillips screw (#00) thatneeds to be removed. Remove this screw to freethe entire assembly from the iPhone.Remove the headphone jack and volume buttonassembly from the iPhone 4.

19.Locate and remove the ten Phillips screws (#00)that secure the display assembly into the body ofthe iPhone.

20.The display assembly is free to be lifted from theiPhone. If necessary, utilize the plastic openingtool to pry the display away from the iPhone 4.

21.To remove the home button, use the tweezers tomaneuver the ribbon cable for the home buttonaway from the iPhone.You can now remove the home button from theiPhone 4.

22.Locate and remove the two Phillips screws (#00)that secure the power button into the top of theiPhone.

23.The power button is connected to a proxy sensorand microphone via ribbon cable, when removingthe assembly be cautious not to damage the ribboncable.You can now, carefully, remove the power buttonassembly from the iPhone 4.

LCDONE,a high-tech company providing the solutions for the mobile phone broken glass screen,including iPhone LCD recycling,Samsung Galaxy LCD recycling,iPhone LCD screen repair swap,Samsung Galaxy LCD screen repair swap,iPhone LCD screen replacement,iPad touch screen replacement and mobile phone accessories.

We do not produce the mobile phone lcd screen, we only do recycle,repair swap and resell lcd screen.

Surprise, now ,register on our website https://www.lcdone.com, with the referral code : jackievon001, you can get a $5 gift certificate. And if you submit order on our website, we will send the free iPhone Repair Tools Kits to you together at the time of delivery.

How to replace iphone 5c lcd screen and digitizer assembly

1.To begin disassembling the iPhone 5c, locate and remove the two pentalobe screws on either side of the lightning dock connector port on the bottom of the iPhone.

2.Next, put the suction cup close to the home button on the display assembly side of the iPhone. While holding the outside of the iPhone down, use the suction cup to pull the display assembly away from the rear case. The left corner, on the home button side of the iPhone 5c, has an area that will expose enough space to insert the plastic opening tool. Use the plastic opening tool to separate the display assembly from the rear case/housing of the iPhone.

3.After lifting up the display assembly, you will see a metal cover that secures the display assembly cables. Locate and remove the four Phillips screws (#00) that secure the cover, and then remove the cover from the iPhone 5c.

4.Utilize the plastic opening tool or spudger to pry up the series of three connections for the display assembly and front-facing camera. You can now remove the display assembly from the iPhone 5c.

5.Locate and remove the two Phillips screws (#00) that secure the back plate for the home button assembly.

6.Using the flat end of the spudger or the tweezers, peel up the ribbon cable connection for the home button. It is secured in place with a small amount of adhesive. You can now remove the home button assembly from the iPhone 5c.

7.Locate and remove the two small Phillips screws (#00) securing the metal clip over the earpiece speaker.

8.Pry up the clip from its location with a pair of tweezers to free the speaker assembly and remove it from the iPhone 5c.

9.The front-facing camera assembly is a series of compo-nents that you need to pry up from their housing. The assembly is also held down by a sticker and adhesive.You can now remove the front-facing camera assembly from the iPhone 5c.

10.Locate and remove the two Phillips screws (#00) that secure the battery connector’s cover. Next, gently pry the connector up to release it from the motherboard.

11.Use the spudger or the plastic opening tool to pry the battery from the adhesive securing it to the iPhone. You can now remove the battery from the iPhone 5c.

12.Locate and remove the seven Phillips screws (#00) that secure the loudspeaker and lightning port assembly (marked with white dots). Next, locate and disconnect the coaxial antenna plug (circled in orange). Now, locate and disconnect the connector for the lightning port assembly (rectangle in orange).

13.There is a small ribbon wire connection that is adhered to the loudspeaker. Peel up this contact to free the loudspeaker for removal from the iPhone 5c.

14.Use the spudger to maneuver and pry up the lightning port assembly and remove it from the bottom of the iPhone.

15.Locate and remove the two Phillips screws (#00) that secure the rear-facing camera and then lift it out of the iPhone.

16.Locate and remove the two Phillips screws (#00) that secure the vibrator to the body of the iPhone. You can now remove the vibrator motor from the iPhone 5c.

17.Use the SIM card removal tool, or a paper clip, to remove the SIM card tray from the side of the iPhone.

18.Locate and remove the three Phillips screws (#00) that secure the motherboard into the phone (white dots mark them). Next, locate and remove the two standoffs with the small flathead screwdriver. The standoffs secure the mother-board to the iPhone (blue dots mark them). Now, locate and disconnect the coaxial antenna plug (circled in orange).

19.With all screws and connections removed, the mother-board is now free. Maneuver the motherboard out of its location and lift it from the iPhone 5c.

20.Locate and remove the six Phillips screws (#00) that secure the power & volume button assembly to the motherboard (white dots mark them). Now, locate and remove the one standoff with the small flathead screwdriver (blue dot marks it).

21.A small amount of adhesive is still securing the power and volume button assembly to the iPhone. Use the spudger or the tweezers to peel up and remove the assembly from the iPhone 5c.

LCDONE,a high-tech company providing the solutions for the mobile phone broken glass screen,including iPhone LCD recycling,Samsung Galaxy LCD recycling,iPhone LCD screen repair swap,Samsung Galaxy LCD screen repair swap,iPhone LCD screen replacement,iPad touch screen replacement and mobile phone accessories.

We do not produce the mobile phone lcd screen, we only do recycle,repair swap and resell lcd screen.

Surprise, now ,register on our website https://www.lcdone.com, with the referral code : jackievon001, you can get a $5 gift certificate. And if you submit order on our website, we will send the free iPhone Repair Tools Kits to you together at the time of delivery.

how to replace iphone 6s plus lcd screen and digitizer assembly - LCDONE

Warning: You are performing this repair at your own risk,We claim no responsibility for any damages that might occur

To perform this DIY repair, you will need the following tools: Small Phillips Screwdriver,iPhone 5-Point Pentalobe Screwdriver,iSesamo Opening Tool,Suction Cup,Fine Tip Curved Tweezers.

Step 1 Power down your iPhone 6s Plus.

Step 2 Remove the two bottom 3.4 mm Pentalobe screws located next to the lightning connector.

Step 3 Place a suction cup near the home button and pull the iPhone 6s Plus display assembly away from the rear case. Use the iSesamo opening tool to slice through the adhesive and help carefully separate the display assembly from the rear case. Take your time and apply firm, constant force. The display assembly is a much tighter fit than most devices and is held down with adhesive. The display assembly is still connected to the iPhone by several cables, so don’t try to remove it entirely just yet.

Step 4 Remove the following 5 Phillips screws securing the metal cover to the iPhone's motherboard. Now use the fine tip curved tweezers to disconnect the LCD, digitizer and front camera and proximity sensor cables.

Step 5 Remove the following 2 Phillips screws securing the home button metal bracket in place. Disconnect and peel the home button ribbon cable away from the display assembly. Remove the 6s Plus home button assembly.

Step 6 Remove the following 3 Phillips screws securing the earpiece speaker bracket to the display assembly. Remove the iPhone 6s Plus earpiece speaker.

Step 7 Gently pry the front camera and proximity sensor ribbon cable away from the display assembly.

Step 8 Remove the 7 Phillips screws that secure the LCD shield plate to the display assembly.

LCDONE,a high-tech company providing the solutions for the mobile phone broken glass screen,including iPhone LCD recycling,Samsung Galaxy LCD recycling,iPhone LCD screen repair swap,Samsung Galaxy LCD screen repair swap,iPhone LCD screen replacement,iPad touch screen replacement and mobile phone accessories.

We do not produce the mobile phone lcd screen, we only do recycle,repair swap and resell lcd screen.

Surprise, now ,register on our website https://www.lcdone.com, with the referral code : jackievon001, you can get a $5 gift certificate. And if you submit order on our website, we will send the free iPhone Repair Tools Kits to you together at the time of delivery.

Video about how to replace iphone se lcd screen - LCDONE

Warning: You are performing this repair at your own risk,We claim no responsibility for any damages that might occur

To perform this DIY repair, you will need the following tools: Plastic Triangle Opening Tool,Suction Cup,SIM Card Ejection Tool,Fine Tip Curved Tweezers,Professional Phillips Screwdriver,Professional iPhone Pentalobe Screwdriver.

Step 1 Power down your Apple iPhone SE smartphone.

Step 2 Remove the two bottom 3.4 mm Pentalobe screws located next to the iPhone SE lightning connector.

Step 3 Place a suction cup near the home button. While applying firm, constant force, use the plastic triangle opening tool to work around the display assembly and separate it from the iPhone SE rear case. Just like the iPhone 5s, lurking beneath the iPhone SE display is the touch ID cable. Do not pull the display up too far without first removing the bracket and disconnecting the cable. The display assembly is still connected to the iPhone by several cables, so don’t try to remove it entirely just yet.

Step 4 Remove the following 4 Phillips screws securing the metal bracket to the motherboard. These screws are different sizes, so be sure to remember where they go. Use the fine tip curved tweezers to remove the metal bracket and disconnect the iPhone SE LCD, digitizer, and front camera and proximity sensor cables.

Step 5 Remove the following 3 Phillips screws securing the home button cable and the metal bracket in place. Remove the metal bracket and then with the tweezers peel the iPhone SE home button away from the display assembly.

Step 6 Remove the following 7 Phillips screws. With the tweezers remove the metal clip and then the iPhone SE earpiece speaker.

Step 7 Gently pry the front camera and proximity sensor ribbon cable away from the display assembly. Now, if necessary, separate the iPhone SE front-facing camera and proximity sensor cable from the LCD shield plate.

LCDONE,a high-tech company providing the solutions for the mobile phone broken glass screen,including iPhone LCD recycling,Samsung Galaxy LCD recycling,iPhone LCD screen repair swap,Samsung Galaxy LCD screen repair swap,iPhone LCD screen replacement,iPad touch screen replacement and mobile phone accessories.

We do not produce the mobile phone lcd screen, we only do recycle,repair swap and resell lcd screen.

Surprise, now ,register on our website https://www.lcdone.com, with the referral code:jackievon001, you can get a $5 gift certificate. And if you submit order on our website, we will send the free iPhone Repair Tools Kits to you together at the time of delivery.

How to replace iphone 4s lcd screen and digitizer assembly

Step 1. Before disassembling your iPhone, be sure it is powered off. Your iPhone 4s rear cover may have either two #000 Phillips screws or Apple's 5-Point "Pentalobe" screws (second image). Check which screws you have, and ensure you also have the correct screwdriver in order to remove them.

 

 

Step 2. Push the rear panel toward the top edge of the iPhone.

 

 

Step 3. Pinch the rear panel with your fingers and lift it away from the iPhone. Alternatively, use aSmall Suction Cup.

 

 

Step 4. Remove the single 2.5 mm Phillips screw securing the battery connector to the logic board.

 

 

Step 5. Use a plastic opening tool to gently pry the battery connector up from its socket on the logic board.Remove the metal clip covering the antenna connector.

 

 

Step 6. Use the clear plastic pull tab to gently lift the battery out of the iPhone.Remove the contact clip from the iPhone.

 

 

Step 7. Use a SIM card eject tool or a paperclip to eject the SIM card and its holder.Remove the SIM card and its holder.

 

 

Step 8. Remove the following two screws: One 1.2 mm Phillips One 1.6 mm Phillips Remove the thin steel dock connector cable cover from the iPhone.

 

 

Step 9. Use an iPod opening tool to gently pry the dock cable connector up off the logic board from both short ends of the connector.

 

 

Step 10. Carefully peel the dock ribbon cable off the logic board and the lower speaker enclosure.

 

 

Step 11. Use a plastic opening tool to pry the lower antenna connector up off its socket on the logic board.

 

 

Step 12. Remove the 1.9 mm Phillips screw securing the bottom of the logic board to the inner case.

 

 

Step 13. Remove the following five screws securing the Wi-Fi antenna to the logic board: One 2.3 mm Phillips Two 1.6 mm Phillips One 1.4 mm Phillips One 4.8 mm Phillips

 

 

Step 14. Use an iPod opening tool to slightly lift the top edge of the Wi-Fi antenna away from the logic board. Use the tip of a spudger to pull the Wi-Fi retaining clips away from the inner frame. Remove the Wi-Fi antenna from the iPhone. Make sure you don't lose the metal clips on the top of the cover where the 4.8mm screw attaches or the 4.8mm screw. That's the primary reason for abnormal Wi-Fi performance after the reassembly.

 

 

Step 15. Use an iPod opening tool to carefully lift the rear camera connector up off its socket on the logic board. Remove the rear camera.

 

 

Step 16. Remove the small circular white sticker (warranty sticker and water indicator) covering the screw near the battery pull tab. Remove the 2.4 mm Phillips screw that was hidden underneath the sticker.

 

 

Step 17. Use the edge of a plastic opening tool to gently pry the following connectors up and out of their sockets on the logic board: Digitizer cable (pry from bottom) LCD cable (pry from bottom) Headphone jack/volume button cable (pry from top) Top Microphone/sleep button cable (pry from top) Front camera cable (pry from top)

 

 

Step 18. Use a small flathead screwdriver to remove the 4.8 mm standoff near the headphone jack.When reassembling the motherboard, ensure that its edge sits under the circled standoff, otherwise the screws will not fit. When reassembling ensure that the small rubber spacer attached to the top of the motherboard is in place. Without this part the motherboard could damage the ribbon cables around it.

 

 

Step 19. Carefully remove the logic board from the iPhone, minding any cables that may get caught.

 

 

Step 20. Remove the single 2.4 mm Phillips screw securing the speaker enclosure to the side of the inner frame.

 

 

Step 21. Remove the speaker enclosure from the iPhone.

 

 

Step 22. Remove the following two screws securing the vibrator to the inner frame: One 6 mm Phillips One 1.4 mm Phillips Remove the vibrator from the iPhone.

 

 

Step 23. Remove the 1.5 mm Phillips screw securing the front panel near the headphone jack.

 

 

Step 24. Remove the three large-headed 1.5 mm Phillips screws along the volume button side of the iPhone.

 

 

Step 25. Remove the 1.5 mm Phillips screw near the lower microphone.

 

 

Step 26. Remove the 1.5 mm Phillips screw near the dock connector ribbon cable.

 

 

Step 27. Remove the three large-headed 1.5 mm Phillips screws along the SIM card side of the iPhone.Remove the small-headed 1.5 mm Phillips screw near the rear camera.

 

 

Step 28. Carefully insert the edge of an iPod opening tool between the rubber bezel around the front glass panel and the steel inner frame. Do not attempt to insert the tool between the glass and the rubber bezel. Carefully pry the upper edge of the front panel assembly away from the steel inner frame.

 

 

Step 29. Slowly and gently lift the top edge of the front panel assembly away from the steel inner frame. Continue to rotate the front panel assembly away from the steel inner frame until it slowly begins to peel off the adhesive applied below the home button area. It may be easiest to insert a spudger at the top and work it around the edges, spreading gently as you go. Carefully pull the lower edge of the front panel assembly away from the steel inner frame.

 

 

Step 30. De-route the digitizer and LCD cables through the steel inner frame, and remove the display from the iPhone.When the front panel has been correctly installed, both the LCD and digitizer cables should be immediately next to one another and should be the same length, as shown in the second photo.During reassembly, do not touch the metallic area at the base of the LCD data cable, as this can cause problems with the LCD. If you do touch it accidentally, clean it gently with an alcohol wipe before continuing.

 

 

Step 31. Your replacement display may come with colored plastic film on the back of the LCD. If so, use the pull tab near the home button to peel the plastic film from the LCD before installing the new display in your iPhone. After reassembly, clean the touchscreen surface with an alcohol wipe prior to turning the iPhone back on. The alcohol helps dissipate any lingering static electricity, which can cause problems with the display. After reassembly, protect your new display from any scratches by installing a newscreen protector.

 

 

LCDONE,a high-tech company providing the solutions for the mobile phone broken glass screen,including iPhone LCD recycling,Samsung Galaxy LCD recycling,iPhone LCD screen repair swap,Samsung Galaxy LCD screen repair swap,iPhone LCD screen replacement,iPad touch screen replacement and mobile phone accessories.

 

 

We do not produce the mobile phone lcd screen, we only do recycle,repair swap and resell lcd screen.

 

 

Surprise, now ,register on our website https://www.lcdone.com, with the referral code:jackievon001, you can get a $5 gift certificate. And if you submit order on our website, we will send the free iPhone Repair Tools Kits to you together at the time of delivery.

how to replace iphone 6 lcd screen and digitizer assembly

step 1.power down your iPhone 6;

step 2.remove the two bottom three point four millimeter pencil of screws located next to the Lightning connector;

step 3.police are searching cars near the home button, while playing firm constant force used the plastic triangle opening tool to work around the display assembly is separated from the iPhone 6 rear case, the display assembly is still connected to the iPhone by several cables, so don't try to remove it ntirely just yet;

step 4.remove the following 5 Phillips screws securing the metal bracket to the motherboard,now use the fine tip curve tweezers to remove the metal bracket and disconnect the LCD digitizer and front camera in proximity sensor cables;

step 5.remove the following three phillips screw securing the earpiece speaker bracket to the display assembly, with the tweezers remove the bracket, in this year P speaker;

step 6.gently pry the front camera in proximity sensor ribbon cable away from the display assembly;

step 7.remove the following to phillips screw securing the home button metal bracket in place, disconnected peel the home button ribbo cable way from the display assembly, remove the home button assembly;

step 8.remove the seven Phillips screws that secure the LCD shield plate to the display assembly,

killed the adhesive securing the home button cable connector to the front panel, and remove the LCD shield played.

LCDONE,a high-tech company providing the solutions for the mobile phone broken glass screen,including iPhone LCD recycling,Samsung Galaxy LCD recycling,iPhone LCD screen repair swap,Samsung Galaxy LCD screen repair swap,iPhone LCD screen replacement,iPad touch screen replacement and mobile phone accessories.

We do not produce the mobile phone lcd screen, we only do recycle,repair swap and resell lcd screen.

Surprise, now ,register on our website https://www.lcdone.com, with the referral code:jackievon001, you can get a $5 gift certificate. And if you submit order on our website, we will send the free iPhone Repair Tools Kits to you together at the time of delivery.

how to replace iPhone se lcd screen

Step 1. Front Panel Assembly If your display glass is cracked, keep further breakage contained and prevent bodily harm during your repair by taping the glass. Lay overlapping strips of clear packing tape over the iPhone's display until the whole face is covered. This will keep glass shards contained and provide structural integrity when prying and lifting the display. Wear safety glasses to protect your eyes from any glass shaken free during the repair.

 

 

Step 2. Power off your iPhone before beginning disassembly. Remove the two 3.9 mm Pentalobe screws from either side of Lightning connector.

 

 

Step 3. iSclack Opening Procedure The next two steps demonstrate using the iSclack, a great tool for safely opening the iPhone 5s that we recommend for anyone doing more than one repair. If you aren't using the iSclack, skip to step 5. Close the handle on the iSclack, opening the suction-cup jaws. Place the bottom of your iPhone in between the suction cups, against the plastic depth gauge. The top suction cup should rest just above the home button. Open the handles to close the jaws of the iSclack. Center the suction cups and press them firmly onto the top and bottom of the iPhone.

 

 

Step 4. Hold onto your iPhone securely and close the handle of the iSclack to separate the suction cups, pulling the front panel up from the rear case. The iSclack is designed to safely open your iPhone just enough to separate the pieces, but not enough to damage the home button cable. Peel the two suction cups off your iPhone. Skip the next three steps and continue on step 8.

 

 

Step 5. Manual Opening Procedure If you don't have an iSclack, use a single suction cup to lift the front panel: Press a suction cup onto the screen, just above the home button. Be sure the cup is completely on the screen to get a tight seal.

 

 

Step 6. The front panel is attached with clips, and there are several ribbon cables connecting it to the rest of the phone. Your goal here is to release the clips and open the phone only enough to disconnect the cables. Go slowly and carefully to avoid damage. Make sure the suction cup is firmly attached to the front panel assembly near the home button. While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the home button end of the front panel from the rear case. With a plastic opening tool, gently pry the edges of the rear case down, away from the front panel assembly, while you pull up with the suction cup. Take your time and apply firm, constant force. The 5s front panel assembly is a much tighter fit than most devices.

 

 

Step 7. Do not try to completely remove the front panel assembly from the rear case, as there are several ribbon cables still attached at the top of the iPhone. Pull the plastic nub to release the vacuum seal on the suction cup. Remove the suction cup from the display assembly.

 

 

Step 8. Open the phone just enough to reveal the metal bracket covering the home button cable. Do not open the phone too far or you risk damaging the home button cable, or the socket it plugs into. Keep the cable loose—if it is stretched taut, that's too far. Only the phone's original home button assembly will be capable of using the Touch ID functionality. If you rip the cable, installing a new home button will only restore ordinary home button functions, not the Touch ID features. Use the tip of a spudger to push the bracket free and remove it with tweezers. During reassembly, be sure to orient the bracket so that the single-prong side faces the bottom of the phone and the side with two slits faces the battery.

 

 

Step 9. Use the tip of a spudger to pry the home button cable connector up out of its socket. Be sure you're separating the cable connector from its socket, and not prying the entire socket up. The socket is on its own glued-down cable that can be pried up if you aren't careful.

 

 

Step 10. Once the connector has been released, pull the home button end of the assembly away from the rear case, using the top of the phone as a hinge. During the next few steps, until you remove the front panel assembly, keep it supported at a 90º angle in relation to the rear case.

 

 

Step 11. Remove the following screws securing the front panel assembly cable bracket to the logic board: One 1.7 mm Phillips #000 screw One 1.2 mm Phillips #000 screw One 1.3 mm Phillips #000 screw One more 1.7 mm Phillips #000 screw This 1.7 mm screw tends to not be attracted to a magnetized screwdriver. Take care not to lose it when removing. It is especially important to keep track of your screws in this step for reassembly. Accidentally using the 1.3 mm screw or one of the 1.7 mm screws in the bottom right hole will result in significant damage to the logic board causing the phone to no longer boot properly. Be careful not to over-tighten the screws. If they don't fit easily when you are securing them, they may be the wrong size, don't force them

 

 

Step 12. Remove the front panel assembly cable bracket from the logic board.

 

 

Step 13. Use the flat end of a spudger to disconnect the front-facing camera and sensor cable.

 

 

Step 14. While still supporting the front panel, disconnect the LCD cable connector. When reassembling your phone, the LCD cable may pop off the connector. This can result in white lines or a blank screen when powering your phone back on. If that happens, simply reconnect the cable and power cycle your phone. The best way to power cycle your phone is to disconnect and reconnect the battery.

 

 

Step 15. Finally, disconnect the digitizer cable connector.

 

 

Step 16. Remove the front panel assembly from the rear case.

 

 

Step 17. Home Button Assembly Unscrew the single captive Phillips #000 screw securing the home button cable. The captive screw is fastened to the home button cable by a spring contact backing. During reassembly, ensure the contact is in the correct orientation—on the side of the screw nearest the LCD.

 

 

Step 18. Fold the home button cable down, out of the way of the home button bracket.

 

 

Step 19. Remove the two 1.4 mm Phillips #000 screws from the home button bracket.

 

 

Step 20. Remove the home button bracket from the display assembly.

 

 

Step 21. Wedge the the tip of a spudger underneath the home button cable assembly. The home button cable is affixed by mild adhesive. Gently work the spudger underneath the cable to separate the home button cable from the front panel assembly. Do not remove the home button yet, as it is still attached to the front panel assembly.

 

 

Step 22. If necessary, remove the tape over the home button on the front side of your cracked front panel assembly. Gently push the top left corner of the home button up away from the front panel. Do not push the home button all the way through—you only need to get a corner free, so that you can pry it free with a spudger. This membrane is very thin. If you feel like you're going to tear the button, apply heat and try again.

 

 

Step 23. Peel the home button the rest of the way off of the display by prying gently with a spudger.

 

 

Step 24. Remove the home button assembly from the front panel.

 

 

Step 25. Display Assembly.Display assembly remains.

 

 

LCDONE,a high-tech company providing the solutions for the mobile phone broken glass screen,including iPhone LCD recycling,Samsung Galaxy LCD recycling,iPhone LCD screen repair swap,Samsung Galaxy LCD screen repair swap,iPhone LCD screen replacement,iPad touch screen replacement and mobile phone accessories.

 

 

We do not produce the mobile phone lcd screen, we only do recycle,repair swap and resell lcd screen.

 

 

Surprise, now ,register on our website https://www.lcdone.com, with the referral code:jackievon001, you can get a $5 gift certificate. And if you submit order on our website, we will send the free iPhone Repair Tools Kits to you together at the time of delivery.